Consult

High temperature burn-in test system for high power module(MPS2020)

For the development of high-power power module, the system adopts technologically advanced energy recovery load. The maximum efficiency of energy recovery is greater than 75%. The system uses a test chamber with compressor, and the maximum heat dissipation in the chamber can reach 3KW (when the test chamber is set at 75℃）.

Function

Single zone load power up to 1000W
Efficient energy feedback
Advanced refrigeration technology, the heat of the power module in the test chamber is taken away in time to ensure the stability of the shell temperature

Product Features

Temperature zone	1
Test temperature	0~200℃
Test zone	16
Bum-in board interface	High current pinhole connector
Electronic loads	single zone4/12 channel, whole machine 64~192
Optional primary power supply	40V/60V/100V
Energy feedback type 28V plus and minus load	±3.3~±28VDC, ±(50mA+6.25A), constant current accuracy ±(1﹪+5mA), 50W, feedback DC terminal voltage5~48V, can be connected in parallel, maximum energy feeding efficiency≥75%
Energy feedback 48V plus and minus load	±3.3~±48VDC,±(50mA~5A), Constant current accuracy ±(1﹪+5mA), 50W, feedback DC terminal voltage5~48V, can be connected in parallel, maximum energy feeding efficiency ≥75%
plusand minus load	can be connected in parallel, maximum energy feeding
High power energy feedback plus load	＋3.3~＋48VDC,＋5~＋20A, constant current accuracy ±(1﹪+50mA), 250W, maximum energy feed efficiency ≥75%
Shell temperature control range and accuracy	60℃~125℃, ±(1﹪+1℃)
Machine power supply	Three-phase AC380±38V
Maximum power	20KW(typical)
Total weight	1900KG(typical)
Dimensions of machine	1850mm(W)×1450mm (D)×2120mm(H)

Applicable standards

GJB548 MIL-STD-883D MIL-M-28787 GB2423

Applicable components

For high-power DC/DC power module